Please click the view panel for the night view

With the development of science and technology, we find that the charging frequency is more USB interface electronic products, instead of traditional home appliances. But the USB line also needs to find the adapter plug in order to charge the electronic product, and the USB charging socket needs to be reinstalled, which is really troublesome.

This product is upgrading existing power socket on the wall, you only need to tear down the original socket panel, put on our USB charging panel, you can achieve the socket to charge a mobile phone and other terminal equipment of USB, and will not stop the 2 socket space original, means you can still like before using the power socket. It is the most attractive, do not remove the original wall socket installation, also without changing lines, users only need to replace the original power socket panel, and then will we charge the USB panel card up to, do not need to re wiring, simple and convenient.

Double USB port on the side, this detail is simply intimate, if there is furniture, what should be placed in front of the socket, you can insert from the side, without occupying space。

output3。USBoutput。IPADoutput2.1A,IPHONEoutput1A.There are two styles of Duplex and Decor

The Charging coverplate, designed to make it easy to add USB ports to a wall outlet with no complicated wiring. It's basically an outlet replacement that features two standard sockets and an additional USB port, and it's meant to be simple enough to install in just a couple of minutes.

Design wise, it looks identical to a standard outlet cover, but it features a hump at the bottom that houses double USB port for charging iOS devices. There are two versions of the Charging coverplate, designed to fit square or round outlets, which make up most of the types of modern outlet plates in the United States.

The Charging coverplate works by connecting the two metal tabs at the sides of the outlet cover to the screws of the outlet, allowing for a small amount of power to be drawn into the USB port of the device.

If you have zero electrical experience and you was able to install the Charging coverplate without running into problems. you can turned off the power to through the circuit breaker, unscrewed your existing outlet cover, pulled it off the wall, snapped the Charging coverplate into place over the bare sockets, and then put the screws back in and turned the power back on. It took all of few minutes to do and was very straightforward.

One caveat -- if you have an outlet that had been installed by an electrician upside down. The Charging coverplate still worked, but you had to install it upside down as well to get the contacts to line up properly to power the USB port.

The Charging coverplate is bit thicker overall than a standard outlet cover and much thicker at the bottom to accommodate USB port, so it makes outlets stand out visually more than a normal outlet would, but it wasn't enough of an aesthetic difference to be super noticeable.

Any USB device can be charged with the Charging coverplate, it's limited to 3 amp,can automatic identification output,So it can identify the charging current of iPhone, iPad, and other devices

if you're looking for a sleek solution that doesn't add visible bulk to your sockets and is easier to install than a solution that requires wiring expertise, the Charging coverplate is a good option. It was quick and easy for you to put in place and since you don't need to do any wiring, you can install it in your apartment on your own.